Materials · 2018 · 17 citations · 42 references
Natural SciencesMaterials EngineeringMaterials ScienceMechanical Behavior Of MaterialsMetallic MaterialsMetallurgyAlloysCreep BehaviorCreep DeformationDeformation MechanismsMetalsPlastic DeformationAlloy Creep BehaviorCreep MechanismsCreep Under Tensile LoadDynamic RecrystallizationMaterial Behaviour At Elevated TemperaturesRecrystallizationRecrystallization BehaviorRecrystallization Kinetics
The paper presents an investigation that was conducted to determine the possibility of the occurrence of the process of dynamic recrystallization in 2024 alloy during monotonic tensile and creep tests at the elevated temperatures of 100 °C, 200 °C, and 300 °C. As-extruded material was subjected to creep process with constant force at elevated temperatures, until two varying degrees of deformation were reached. After cooling at ambient temperature, the pre-deformed material was subjected to monotonic and fatigue tests as well as metallographic analysis. The process of dynamic recrystallization was determined in monotonic tests to occur at low strain rate (0.0015/s) only at the temperature of 300 °C. However, in the creep tests, this process occurred with varying efficiency, both during creep at 200 °C and 300 °C. Dynamic recrystallization was indicated to have a significant influence on the monotonic and cyclic properties of the material.
42
The exponential law of endurance tests
Oh. Basquin · Medical Entomology and Zoology · 1910 · 1.4K citations