AIP conference proceedings · 2018 · 26 citations · 7 references
EngineeringManufacturing EngineeringMaterials EngineeringAdditive ManufacturingManufacturing ProcessesMetallic MaterialsAdditive Manufacturing For Automotive PartsAlloysElectron Beam WeldingMetal Additive ManufacturingMetal FabricationMetalsAdditive Manufacturing AlloysAdditive Manufacturing MicrostructureAdditive Manufacturing Of Metal StructuresNickel AlloysNickel-based AlloysWeld Penetration
The electron beam additive manufacturing process with wire is a part of global trend to find fast and efficient methods for producing complex shapes elements from costly metal alloys such as stainless steels, nickel alloys, titanium alloys etc. whose production by other conventional technologies is unprofitable or technically impossible. Demand for additive manufacturing is linked to the development of new technologies in the automotive, aerospace and machinery industries. The aim of the presented work was to carried out research on electron beam additive manufacturing with a wire as a deposited (filler) material. The scope of the work was to investigate the influence of selected technological parameters such as: wire feed rate, beam current, travelling speed, acceleration voltage on stability of the deposition process and geometric dimensions of the padding welds. The research revealed that, at low beam currents, the deposition process is unstable. The padding weld reinforcement is non-uniform. Irregularity of the width, height and straightness of the padding welds can be observed. At too high acceleration voltage and beam current, burn-through of plate and excess penetration weld can be revealed. The achieved results and gained knowledge allowed to produce, based on EBAM with wire process, whole structure from stainless steel.
7