Single‐step fabrication of an anode supported planar single‐chamber solid oxide fuel cell

Yunus Sayan, V. Venkatesan, Erdogan Guk, Houzheng Wu, Jung‐Sik Kim

International Journal of Applied Ceramic Technology · 2018 · 13 citations · 19 references

DOIFull text

Open access

Concepts

Abstract

Abstract We present single‐step‐co‐sintering manufacture of a planar single‐chamber solid oxide fuel cell ( SC ‐ SOFC ) with porous multilayer structures consisting of NiO/ CGO , CGO and CGO ‐ LSCF as anode, electrolyte, and cathode, respectively. Their green tapes were casted with 20 μm thickness and stacked into layers of anode, electrolyte, and cathode (10:2:2), then hot‐pressed at 2 MP a and 60°C for 5 minutes (deemed optimal). Subsequently, hot laminated layers were cut into 40 × 40 mm cells and co‐sintered up to 1200°C via different sintering profiles. Shrinkage behavior and curvature developments of cells were characterized, determining the best sintering profile. Hence, anode‐supported SC ‐ SOFC s were fabricated via a single‐step co‐sintering process, albeit with curvature formation at edges. Subsequently, anode thickness was increased to 800 μm and electrolyte reduced to 20 μm to obtain SOFC s with drastically reduced curvature with the help of a porous alumina cover plate.

References

19