Thermodynamic Aspects of Stirling Engines with Two-Phase, Two-Component Working Fluids

Graham Walker, Babatunde Agbi

Transactions of the Canadian Society for Mechanical Engineering · 1973 · 10 citations · 0 references

Concepts

Abstract

A Stirling engine operates on a closed regenerative thermodynamic cycle with compression and expansion of the working fluid at different temperatures so there is a net conversion of energy. Stirling engines may be used as prime movers, refrigerating machines, heat pumps or pressure generators. Conventional Stirling engines use a gaseous working fluid but some improvement in specific output may be gained by the use of a two-phase, two-component working fluid with additional advantages in improved heat transfer and less critical sealing problems. The compound working fluid consists of a gaseous carrier and a component which is liquid in the cold compression space and changes during the regenerative process to the vapour phase in the expansion space. This phase change of one component reduces the cycle compression work and also, in effect, increases the volume compression ratio so that the pressure ratio is increased. The net cycle work is therefore increased. The theoretical study reported here shows that the net cycle work of a machine with a compound working fluid may be two or three times greater than the machine having a gaseous working fluid with no penalties in terms of size, weight and cost. The degree of improvement depends on the particular design and operating conditions of the engine. The effects of variation of some of these parameters are explored.