IEEE Transactions on Microwave Theory and Techniques · 2018 · 44 citations · 40 references
EngineeringElectrical EngineeringMicroelectronicsMicrowave EngineeringSemiconductor DevicesHigh-frequency Semiconductor DevicesMicrowave AmplifiersMicrowave Integrated CircuitsMicrowave Semiconductor DevicesPower AmplifiersRadio-frequency Integrated CircuitsDie DesignGain FlatnessGallium Nitride Power AmplifiersMonolithic Microwave Integrated Circuit DesignMonolithic Microwave Integrated CircuitsParasitic Capacitance CompensationPower Added EfficiencyPower Amplifier Design
The design and implementation of a GaN stacked distributed 2-19GHz monolithic microwave integrated circuit (MMIC) power amplifier (PA) is presented in this paper. The PA architecture uses six distributed cells, each containing a stack of three transistors. A design method that employs capacitance compensation is presented and applied to a 5-10-W PA design for the 2-19-GHz range in a 100-nm GaN on Si technology. The resulting measured performance at 28-V supply shows a gain flatness of 20.5 ± 1.5 dB, with an output power of 37.4-40.9 dBm and corresponding power-added efficiency of 22%-49% over the entire frequency range. To the best of the authors' knowledge, this is the first demonstration of a GaN on Si stacked distributed MMIC PA, with a die size of 2.8 × 1.7 mm <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2</sup> and with a maximum power density of 2.58 W/mm <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2</sup> over chip area.
40