Design and Characterization of a Low-Noise Front-End Readout ASIC in 0.18-<inline-formula> <tex-math notation="LaTeX">$\mu$ </tex-math> </inline-formula>m CMOS Technology for CZT/Si-PIN Detectors

Abstract

In this paper, we report the recent development of a low-noise front-end readout application-specified integrated circuit (ASIC) for cadmium-zinc-telluride (CZT) and Si-p-i-n detectors. The readout chain consists of a charge sensitive amplifier, a CR-RC pulse shaper followed by a Sallen-Key lowpass filter, readout buffers, and a discriminator. The layout using deep n-well (DNW) is adopted to optimize the noise performance. A prototype ASIC is implemented in TSMC CMOS 0.18-μm, 1.8 V/3.3 V mixed-signal technology. The die size of the prototype chip is 2.1 mm x 2.5 mm. At room temperature, the equivalent noise charge of the front-end readout channel using DNW implementation is 112 e <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">-</sup> (rms) + 17 e <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">-</sup> pF at the power consumption of less than 2 mW/channel. The linearity error is less than 3%. By connecting the readout ASIC to a CZT detector, we obtained that the energy resolutions of a γ-ray spectrum are 3.9% and 5.5% (full-width at half-maximum), respectively, at the 59.5-keV line of <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">241</sup> Am source. The ASIC is a good solution of front-end electronics for personal dosimeters.