Fibres and Textiles in Eastern Europe · 2018 · 21 citations · 10 references
ArtsMaterials EngineeringMaterials ScienceMaterials CharacterizationMechanical Behavior Of MaterialsPolymer MaterialsFabric ConstructionTechnical TextilesTextile MaterialsWeavingFabric StrengthSpinningSpinning TechnologySurface PropertiesTensile StrengthWeaving TechnologyYarn EngineeringYarn Interlacement
The purpose of this study was to examine the effect of spinning technologies and weave design on fabric mechanical and surface properties. For this purpose, ring spun (combed, carded) and open-end (OE) techniques were used to manufacture yarns of polyester cotton (50:50) which were used in the weft, and 100% cotton yarn in the warp. Plain, twill, and satin weave designs were selected to construct woven samples on a projectile loom. The variation in fabric tensile strength is obvious with respect to weave designs. Higher interlacing of yarn produces more crimp in the load bearing, which may cause lower breaking strength and fewer broad floats. The mechanical and surface properties of these fabric samples were investigated and statistical analysis was performed, which showed a significant effect of the spinning technique and weave design on these properties.
10
Mary Lynn Realff, Moon Hwo Seo, Mary C. Boyce et al. · Textile Research Journal · 1991 · 65 citations
Natural Sciences, Materials Engineering, Materials Science +16
The Structure of Open-End Spun Yarn
P. R. Lord · Textile Research Journal · 1971 · 59 citations
Natural Sciences, Materials Engineering, Materials Science +11
COMPARITIVE STUDIES ON RING ROTOR AND VORTEX YARN KNITTED FABRICS
N. Anbumani, C. Rameshkumar, P. Anandkumar et al. · Autex Research Journal · 2008 · 34 citations · Full text
Natural Sciences, Materials Engineering, Materials Science +11