The Comparison of Surface Modification Methods of the Heavy Metals Adsorption of Activated Carbon from Rice Husk

Abstract

Surface modification of activated carbon (AC) could be done through different methods in order to modify their specific physical and chemical properties to facilitate metals removal from wastewater. Three methods were used to modify the rice husk AC (RHAC) including the use of (1) HNO 3 , (2) dithizone and (3) the combination of HNO 3 with dithizone. These modification agents were increased its affinity towards the desired pollutant. The modification methods demonstrated the effective process for the metal ions adsorption capability and the removal of them from water. For Ni 2+ and Cd 2+ adsorption, RHAC was modified by HNO 3 giving the best adsorption capacity in comparison with using dithizone or the combination of HNO 3 with dithizone. That adsorption was reached 17.23 mg/g for Ni 2+ and 29.61 mg/g for Cd 2+ . Additionally, the surface area, which was characterized by BET (Brunauer–Emmett–Teller) of RHAC, was 710.8 m 2 /g and DA micropore volume was 0.447 (cm 3 /g). Especially, the only modified RHACs had the peak of N-H functional group by using Fourier transform infrared spectrum (FTIR). Besides, the only RHAC modification by HNO 3 had peak of C=O. That significantly contributed to increase the metal ions adsorption capacity of RHAC.