Journal of Environmental Science and Health Part A · 2018 · 15 citations · 33 references
EngineeringEnvironmental EngineeringEnvironmental SciencesBioreactor DesignWastewater TreatmentWater TreatmentBiological Treatment ProcessesNutrient RemovalWastewater BiotreatmentWastewater ManagementWastewater Quality ManagementChemical Oxygen DemandEnergy ConsumptionOxygen Uptake RateProcess Energy PerformanceTreatment Plant Performance EvaluationWastewater AerationWastewater Effluent QualityWastewater Treatment Processes
In this work, the effect of the improvement carried out at a large-scale wastewater treatment plant (WWTP) was evaluated, by means of modelling works, with the aim to determine the influence of the modernization over the process performance. After modernization, the energy consumption due to the aeration decreased about a 20% maintaining the effluent quality. In order to double-check the good effluent quality, modelling works were carried out at the full-scale plant. After calibration, the model was applied to the upgraded full-scale plant obtaining deviations lower than 10%. Then, the performance of the main biochemical processes was evaluated in terms of oxygen uptake rate (OUR), ammonia uptake rate (AUR), and chemical oxygen demand (COD) consumption. The rate of the main processes depending on the aeration, that is OUR and AUR, were about 22 gO2/(kg VSS·h) and 2.9 gN/(kg VSS·h), respectively.
33
A Simplex Method for Function Minimization
J. A. Nelder, R. Mead · The Computer Journal · 1965 · 28.9K citations
Activated Sludge Model No.2d, ASM2D
Mogens Henze, Willi Gujer, Takahashi Mino et al. · Water Science & Technology · 1999 · 581 citations
Engineering, Chemical Engineering, Environmental Engineering +17
Activated Sludge Model No.2d, ASM2d
Mogens Henze, Willi Gujer, Takahashi Mino et al. · Water Science & Technology · 1999 · 505 citations
Engineering, Chemical Engineering, Environmental Engineering +17