Suitability of sawdust from three tropical timbers for wood-cement composites

Abstract

Construction material rising cost and global demand for economically-sustainable and environmentally-friendly building resources have necessitated the use of sawdust-cement composite. Wood constituents and cement incompatibility hinder its production and need careful selection of the timber. Sawdust suitability from Triplochiton scleroxylon, Entandrophragma cylindricum and Klainedoxa gabonensis for wood-cement composite was determined by identifying their chemical constituents and their composites’ physico-mechanical properties. T. scleroxylon recorded the minimum total extractive (6.12%), lignin (29.89%) and holocellulose (56.38%) and K. gabonensis the maximum (9.31, 31.59 and 57.5% respectively). Ash content was higher for T. scleroxylon (7.6%) but lower for K. gabonensis (1.53%). T. scleroxylon boards were stronger [Modulus of Elasticity (MOE) = 696.1 N/m2] and more moisture-resistant [Moisture Absorption (MA) = 8.8%] than E. cylindricum (MOE = 625.9 N/m2; MA = 9.5%). K. gabonensis boards crushed after manufacturing due to its incompatibility with cement. T. scleroxylon sawdust is suitable for wood-cement composites due to its more compatible chemical constituents (i.e., lower extractive, lignin, holocellulose contents and more ash) and its boards’ excellent physico-mechanical properties than those for the other timbers. Its sawdust-cement composites could be utilized for cladding and walling. The use of sawdust would increase green building resource base and reduce environmental pollution.