Journal of Rock Mechanics and Geotechnical Engineering · 2018 · 61 citations · 17 references
EngineeringGeological EngineeringPetroleum EngineeringDrillingDrilling EngineeringReservoir EngineeringDrilling HydraulicsDrilling OperationsFracture CharacterizationAcoustic MonitoringBorehole DrillingGeological HeterogeneityHole Angle EffectsNozzle GeometryPermeability Estimation While DrillingRate Of Penetration PredictionRock Mass Permeability
In this context, we applied the radial water jet drilling (RJD) technology to drill five horizontal holes into a quarry wall of the Gildehaus quarry close to Bad Bentheim, Germany. For testing the state-of-the-art jetting technology, a jetting experiment was performed to investigate the influence of geological heterogeneity on the jetting performance and the hole geometry, the influence of nozzle geometry and jetting pressure on the rate of penetration, and the possibility of localising the jetting nozzle utilizing acoustic activity. It is observed that the jetted holes can intersect fractures under varying angles, and the jetted holes do not follow a straight path when jetting at ambient surface condition. Cuttings from the jetting process retrieved from the holes can be used to estimate the reservoir rock permeability. Within the quarry, we did not observe a change in the rate of penetration due to jetting pressure variations. Acoustic monitoring was partially successful in estimating the nozzle location. Although the experiments were performed at ambient surface conditions, the results can give recommendations for a downhole application in deep wells.
17
The use of drill-bit energy as a downhole seismic source
J. W. Rector, B. Marion · Geophysics · 1991 · 140 citations