Color matching of fiber blends: Stearns‐Noechel model of digital rotor spun yarn

Rui Hua Yang, Rui Ye Han, Yu Zheng Lu, Yuan Xue, Wei Gao

Color Research & Application · 2017 · 15 citations · 12 references

Concepts

Abstract

Abstract Stearns‐Noechel model was utilized as a primary reference to study color matching principles of digital rotor spun yarn. Three primary colored (red, yellow and blue) cotton fibers were used to spin blended yarns. Spectral reflectance of the two‐component and three‐component samples was measured with data color spectrophotometer. For these samples, the Stearns‐Noechel model parameter M was determined. Four methods were employed to calculate the M value to improve accuracy of the model, 1.Classical method, named as M 1; 2.Optimizing the M 1 value obtained by the classical method considering the wavelength factor, named as M 2; 3.Simplified M 2 according to the linear correlation with the wavelength, named as M 3; 4. Simplified M 2 according to the segmentation correlation with the wavelength, named as M 4. The study shows that average color difference of the two‐component decreases from 2.7 to 1.48, and for three‐component samples from 3.32 to 1.66, by using M 2 instead of M 1. While calculated using M 3, the color difference of the two types of samples will be 1.73 and 2.19, correspondingly. This cannot meet color matching needs. As for M 4, the average color difference of the two categories will be 1.54 and 1.91, better than the result obtained using M 1 and M 3, worse than M 2.

References

12