2017 · 13 citations · 7 references
EngineeringElectrical EngineeringBrake SystemsElectric MachinesPower ElectronicsElectric Brake SystemsElectric DrivesElectric Motor Drive SystemsElectric Motor DrivesElectric Traction MotorsElectrical System TestingConducted EmissionsEquivalent Circuit AnalysisEquivalent Circuit ModelingInverter ModelingMotor Drive ModelingMotor Drive SystemsThree-phase Motor CircuitsThree-phase Motor Drives
In this paper, a modeling method for predicting the conducted emission with a current probe method is presented for a motor-drive braking system. The proposed model considers the motor driving circuit components and the measurement environment. The models of motor driving circuit component include PWM inverter circuits, 3-phase motor, PCB, heatsink, bus bars, and motor casing. The models of measurement environment involve the current probe, test table including ground plane, harness cable, and LISN. To reflect the accurate path of common and differential mode current of the motor drive system, co-simulation is proposed with the equivalent circuit and SPICE model. Co-simulation is eventually conducted by using EMC Studio of EMCoS Ltd. for the calculation of electromagnetic coupling around the circuit, and the high-frequency parameters of the motor driving circuit are calculated through ANSYS Inc.'s Q3D. For the model validation, the measurement and simulation results are compared, and the results of the conducted emission of those agree well in the range of 100 kHz up to 108 MHz.
7
A study on inverter and motor winding for conducted EMI prediction
Hwan-Kyun Yun, Yuen-Chung Kim, Chung-Yuen Won et al. · 2002 · 18 citations
A new and easy approach to create BCI models
I. Oganezova, Xavier Bunlon, A. Gheonjian et al. · 2014 · 14 citations