Journal of Thermoplastic Composite Materials · 2017 · 14 citations · 35 references
Natural SciencesEnvironmental EngineeringMaterials SciencePolymer MaterialsResource RecoveryWaste ManagementComposite MaterialsMaterial PerformanceNanocompositesPolymer CompositesPolymer NanocompositesRecycled MaterialsFiller MaterialsFlexural BehaviorFlexural StrengthFlexural Strength DevelopmentPolyethyleneReinforcementTemperature-dependent DegradationThermal Stability
Industrial lime sludge (LS) waste is an environmental hazard which is usually disposed in dump yards or used in disorganized land filling, thus causing pollution. The aim of the present work is to investigate whether the functionality and commercial viability of this industrial waste can be enhanced by utilizing the calcium carbonate (CaCO 3 )-rich LS waste as reinforcement in high-density polyethylene (HDPE) matrix. Mechanical, thermal, and morphological properties are studied by blending LS with HDPE in various weight fractions. It is observed that the flexural strength, tensile modulus, and flexural modulus increased significantly with the addition of LS in the polymeric matrix indicating effective reinforcement by rigid particulate filler. The onset thermal degradation temperature is also increased significantly upon LS addition, thus raising the thermal stability of the composites. Hence, the development of LS-reinforced HDPE composites can be considered as an effective way to enhance the properties of polymeric composites as well as to reduce pollution by recycling an industrial waste.
35
Introduction to Physical Polymer Science
Manfred Stamm · Macromolecular Chemistry and Physics · 2006 · 1.2K citations
Polypropylene/calcium carbonate nanocomposites
Chi‐Ming Chan, Jingshen Wu, Jianxiong Li et al. · Polymer · 2002 · 925 citations
Toughening of polypropylene with calcium carbonate particles
W.C.J. Zuiderduin, C. Westzaan, J. Huétink et al. · Polymer · 2002 · 674 citations
Natural Sciences, Materials Engineering, Materials Science +12