MATEC Web of Conferences · 2017 · 28 citations · 4 references
EngineeringCivil EngineeringDesignBridge EngineeringDesign OptimizationStructural EngineeringBridge ConstructionBridge DesignStructural LoadsStructural OptimizationGirder Bridge ConstructionGirder DesignStress-strain AnalysisStress-strain CurveStress-strain RelationsStress-strain RelationshipsStructural Rigidity
The development of transport infrastructure, reconstruction of roads and railways, together with growing urban traffic necessitate the construction of new bridges and/or the reconstruction of existing ones. The primary objective of design is obtaining a reasonable system in compliance with the requirements for stress-strain state: equal strength or equal torque, maximum rigidity or minimum weight of the structure. In the paper, the object of optimization is the design of a three-span girder bridge of a specified length under the constant load. The sets of both statically determinate and statically indeterminate systems are considered, namely: three-span hinged girders in which the hinge joints are located in the end spans or middle span, and three-span continuous girders on unilateral supports or on resilient supports. Two variable design parameters are taken into account: the length of each end span z1 and the position of the hinges x for the statically determinate systems, and the displacement of support assemblies joints Δ or the value that affects the displacement, i.e. flexibility of yielding supports c for the statically indeterminate ones. The authors proved that there are optimal solutions in the set of statically indeterminate systems both with unilateral and with elastic constraints.
4
A simple evolutionary procedure for structural optimization
Yi Min Xie, Grant P. Steven · Computers & Structures · 1993 · 2.6K citations