IOP Conference Series Earth and Environmental Science · 2017 · 28 citations · 16 references
EngineeringElectrical EngineeringMechanical EngineeringEnergy SystemsHeat TransferRenewable Energy SystemsConcentrated Solar PowerEnergy ConversionRenewable Energy Power ConversionSolar Energy SystemsSolar Thermal SystemsThermal ManagementConcentrating Solar CollectorsDish Stirling SystemsFlux Distribution AnalysisFocal PositionPower Conversion EfficiencySolar ConcentratorsSolar Dish SystemsSolar-to-thermal Conversion Efficiency
Dish-Stirling concentrated solar power system (DS-CSP) is an important pathway for converting solar energy into electricity at high efficiency. In this study, a rated power 38 kW DS-CSP system was developed (installed in Xiangtan Electric Manufacturing Group). The heat engine adopted the alpha-type four cylinders double-acting Stirling engine (Stirling Biopower Flexgen S260). The absorber flux distribution simulation was conducted using ray tracing method and then the 204 m2 parabolic dish concentrator system (diameter is 17.70 m and focal length is 9.49 m) with single concentrator plus single pillar supporting has been designed and built. A water-cooled disc target and an absorber imitation device were adopted to test the tracking performance of the dish concentrator system, homogeneity of the focal spot and flux distribution of the absorber. Finally, the S260 Stirling engine was installed on the focal position of the dish concentrator and then the net output power date of the 38 kW DS-CSP system was tested. The absorber overheating problem on the DS-CSP system performance was discussed when the DS-CSP system was installed in different locations. The testing result shows that this system achieved the net output power of 38 kW and solar-to-electricity efficiency (SEE) of 25.3% with the direct normal irradiation (DNI) at 750 W/m2. The net output power can further increase to 40.5 kW with the SEE of 26.6% when the DNI reaches up to the maximum of 761 W/m2. The net output power of the 38 kW DS-CSP system has a linear function relationship with the DNI. The fitting function is Net power output=0.1003×DNI-36.129, where DNI is at the range of 460∼761 W/m2. This function could be used to predict the amount of the 38 kW DS-CSP system annual generation power.
16
Dish-Stirling Systems: An Overview of Development and Status
T.R. Mancini, Peter Heller, B.L. Butler et al. · Journal of Solar Energy Engineering · 2003 · 349 citations
A new 500m2 paraboloidal dish solar concentrator
Keith Lovegrove, G. Burgess, John Pye · Solar Energy · 2010 · 215 citations
A.Z. Hafez, Ahmed Soliman, K.A. El-Metwally et al. · Renewable and Sustainable Energy Reviews · 2016 · 150 citations · Full text
Engineering, Electrical Engineering, Performance-based Design +11