IOP Conference Series Materials Science and Engineering · 2017 · 10 citations · 10 references
Natural SciencesMaterials EngineeringMaterials SciencePolymer ChemistryPolymer EngineeringPolymer MaterialsComposite MaterialsConducting PolymersConductive PolymersFiber PropertiesPolymer CharacterizationPolymer ProcessingFiber EngineeringInterfacial AdhesionInterfacial Adhesion In CompositesInterfacial Adhesion TestingLow-temperature ProcessingPiezoelectric PolymersSpinningSpinning Technology
A first study focused on the realization of a 100% Polyvinylidene fluoride woven fabric. The multi-filaments produced by melt spinning and studied by FTIR, X-Ray and DSC, were optimized in the β-phase, 97%, thanks drawing ratio of λ=5, and the processing temperature, 90°C. When the polar β-phase achieves a certain level in PVDF, the woven material is poling with fields up to about 6kV. DMA tests coupled to a Keithley voltmeter allow the solicitation of PVDF fabrics. A variation of voltage is obtained in compression, with a maximum output voltage of up to 2,3V. The other part of the study explains premises of a tricomponent fibre development, PEHD/PVDF/PA12. Two layers of conductive polymers acting as electrodes are placed on either side of the PVDF layer. The interfacial adhesion between the three different layers is analysed by SEM. The maximum stretch on melt spinning was fixed at 2.5 and the β-phase of the PVDF measured by X-Ray.
10
Ali Salimi, Ali Akbar Yousefi · Polymer Testing · 2003 · 1K citations
João Gomes, J. Serrado Nunes, Vítor Sencadas et al. · Smart Materials and Structures · 2010 · 476 citations
Natural Sciences, Materials Engineering, Materials Science +17