Sustainability · 2017 · 29 citations · 34 references
EngineeringMechanical EngineeringEnergy EconomicsEnergy SystemsHeat TransferCycle OptimizationEnergy ConversionEnergy EfficiencyEnergy Recovery From WastePower CyclesThermodynamic CyclesBrayton CycleLevelized Cost Of ElectricityLevelized Cost Of EnergyOrganic Rankine CyclePower OutputTechno-economic AnalysisThermodynamic AnalysisWorking Fluids
The analysis and optimization of an organic Rankine cycle (ORC) used as a bottoming cycle in the Brayton/ORC and steam Rankine/ORC combined cycle configurations is the main focus of this study. The results show that CO2 and air are the best working fluids for the topping (Brayton) cycle. Depending on the exhaust temperature of the topping cycle, Iso-butane, R11 and ethanol are the preferred working fluids for the bottoming (ORC) cycle, resulting in the highest efficiency of the combined cycle. Results of the techno-economic study show that combined Brayton/ORC cycle has significantly lower total capital investment and levelized cost of electricity (LCOE) compared to the regenerative Brayton cycle. An analysis of a combined steam Rankine/ORC cycle was performed to determine the increase in power output that would be achieved by adding a bottoming ORC to the utility-scale steam Rankine cycle, and determine the effect of ambient conditions (heat sink temperature) on power increase. For the selected power plant location, the large difference between the winter and summer temperatures has a considerable effect on the ORC power output, which varies by more than 60% from winter to summer.
34
Working fluids for low-temperature organic Rankine cycles
B. Saleh, G KOGLBAUER, Martin Wendland et al. · Energy · 2006 · 1K citations
Engineering, Chemical Engineering, Mechanical Engineering +7
Design and testing of the Organic Rankine Cycle
Takahisa Yamamoto, Tomohiko Furuhata, Norio Arai et al. · Energy · 2001 · 546 citations
Natural Sciences, Chemical Engineering, Life Cycle Assessment +7