Archives of Metallurgy and Materials · 2017 · 47 citations · 10 references
EngineeringMaterials EngineeringMaterials ScienceMechanical Behavior Of MaterialsMetallic MaterialsMetallurgyAlloysLaser Beam WeldingMetalsSteel MaterialsWeldingWelding ProcessesAutogenous WeldingLaser WeldingMartensitic Phase TransformationMetal Impact ToughnessSteel MetallurgySteel WeldingTensile StrengthWelding Process Parameters
Abstract The article presents results of investigations on autogenous laser welding of new grade STRENX 1100 MC steel. The modern Disk laser was applied for of 5.0 mm thick butt joints welding. The influence of laser welding parameters, mainly the energy input of laser welding on the penetration shape, weld quality, structure and mechanical performance was investigated. It was found that the investigated steel has surprisingly low carbon equivalent CET just 0.328, and also relatively high temperature of martensitic transformation M s at 430.6°C. Despite very rapid cooling times t 8/5 in a range from 0.6 to 1.3 s, thus rapid solidification there was no tendency to cracking of weld metal or HAZ. Significant drop of microhardness in the HAZ resulted in a decrease of tensile strength of joints, compared to the base metal. Impact toughness of test joints was at only 50÷60% of the base metal.
10
A. Lisiecki · Archives of Metallurgy and Materials · 2014 · 56 citations · Full text
Oxide Inclusions in Steel Welds of Car Body
Tomasz Węgrzyn, J. Miroslawski, Abílio P. Silva et al. · Materials science forum · 2010 · 53 citations · Full text