Laccase‐catalyzed polymerization drying of <scp>C</scp>hinese lacquer sap with <scp>T</scp>i<scp>O</scp><sub>2</sub> nanoparticles

Jianhong Yang, Fengqin Shen, Jianping Deng, Jun Cai, Qiuhua Zhang, Wanghui Liu

Journal of Applied Polymer Science · 2017 · 14 citations · 36 references

Concepts

Abstract

ABSTRACT Nano‐TiO 2 /lacquer hybrid coatings are prepared by the blend of nano‐TiO 2 and lacquer sap. Nano‐TiO 2 particles are involved in the laccase‐catalyzed polymerization process of urushiol, which improves the properties of lacquer film. With increasing nano‐TiO 2 from 0 to 5 wt %, the drying time of lacquer film to reach hardened dryness decreases from &gt;12 h to 8 h 30 min under 30 °C and 80% relative humidity. Gel permeation chromatography analysis shows that the addition of nano‐TiO 2 accelerates the polymerization of urushiol. It is also related to the formation of TiOC bonds due to the reaction between nano‐TiO 2 and the radicals produced by laccase‐catalyzed oxidation. The pencil hardness, flexibility, and adhesion of hybrid lacquer film can be improved and reach 4H, 1 mm, and grade 2, respectively. Its inhibition rate against Escherichia coli and Staphylococcus aureus increases from 22.6% and −21.4% to 49.2% and 67.8%, respectively. Furthermore, nano‐TiO 2 hybrid lacquer films also possess higher thermo‐stability than the raw lacquer film. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135 , 45865.

References

36