Shaft cooling and the influence on the electromagnetic performance of traction motors

Y. Gai, Mohammad Kimiabeigi, James D. Widmer, Yew Chuan Chong, James Goss, Unai SanAndres, D.A. Staton

2017 · 28 citations · 15 references

Concepts

Abstract

This paper addresses the heat transfer coefficient associated with a shaft-cooling of traction motors. In such shaft-cooling systems, the 50-50 ethylene glycol-water is made to flow through the shaft hole in order to cool the machine. The heat transfer coefficient is estimated using a computational fluid dynamics(CFD) method, where the effect of the rotational velocity as well as the liquid flow rate have been accounted for. The results from two different turbulence models were compared. As a result of the simulations, it is concluded that the rotational speed can significantly increase the convective heat transfer in the shaft hole above the stationary condition. Finally, the benefits of implementing a shaft-cooling to an existing ferrite magnet traction motor, in terms of the continuous torque capability, is described.

References

15