DOAJ (DOAJ: Directory of Open Access Journals) · 2014 · 14 citations · 0 references
Natural SciencesChemical EngineeringChemistryBiocatalysisCatalysisReaction EngineeringAnaerobic DigestionBiofuel ProductionBiogas ProductionCatalyst RegenerationCatalytic MaterialsCatalytic Reaction EngineeringAbsorption EfficiencyBiogasBiogas PurificationBiomass Conversion CatalysisCatalytic ActivityEnergy Absorption EfficiencyGas PurificationPhysical Absorption
This work determined the absorption efficiency of H2S in the solution of Fe-EDTA in synthetic biogas flows, as well as the efficiency of physical absorption of CO2 in Fe-EDTA. Biogas was bubbled through a pseudo-catalytic solution of Fe-DTA resulting in the formation of sulfur particles. H2S absorbed in the Fe-EDTA suffered a redox reaction. The Fe-EDTA solution used was regenerated with air. It was used two types of catalysts, in order to compare the efficiency of a catalyst of Fe-EDTA synthesized in the laboratory in an inert atmosphere, in relation to a commercial catalyst containing Fe-EDTA. In the batch study, removing H2S from biogas indicated that the concentration of Fe-EDTA applies great influence on the catalytic activity. For a system operating in a continuous regimen, it was possible to completely eliminate the H2S from biogas with Fe-EDTA synthesized in laboratory. The removal of CO2 present in the biogas was also evaluated. It was possible to achieve maximum efficiency of the CO2 absorption in 90 % in steady state, it was obtained an increase of 16 % in the calorific value of biogas, from 8.03 to 9.28 kWh/m3.