Desalination and Water Treatment · 2017 · 27 citations · 27 references
EngineeringEnvironmental EngineeringMaterials ScienceCeramic MaterialsCeramicsWater TreatmentMembrane CharacterizationMembrane EngineeringMembrane FabricationMembrane MaterialsPorous CeramicsWater Desalination MembranesCeramic Membrane FabricationFiltration MembranesMicrofiltrationMicrofiltration MembranesMicrofiltration TreatmentPolyvinyl Alcohol MembranesPorous Support LayersWater Permeability
ABSTRACT New ceramic supports from low-cost natural Tunisian sand have been prepared and characterized. Plastic paste has been prepared from sand powder (average particle size ≈ 100 μm) mixed with organic additives and water. The obtained paste has been extruded to porous tubular supports. After firing at 1,250°C/3 h, the support has shown a porosity of 44.72% and an average pore diameter of 10.36 μm. SEM analysis has shown smooth and cracks-free surface of the tubular supports. The tubes have displayed good chemical and mechanical properties. The water permeability of the sand support sintered at 1,250°C/3 h has been 3,611 L/h m 2 bar. Microfiltration layer has been also prepared from the same natural sand powder (average particle size <50 μm) by the slip casting method using a mixture of powder sand, water and polyvinyl alcohol solution. The water permeability of the microfiltration membrane sintered at 1,100°C/3 h has been 1,228 L/h m 2 bar. The obtained microfiltration membrane has been tested for the treatment of cuttlefish effluent. The membrane has displayed better separation performance in terms of chemical oxygen demand and turbidity removal.
27
Nabil Saffaj, M. Persin, Saad Alami Younsi et al. · Applied Clay Science · 2005 · 171 citations
Engineering, Environmental Engineering, Materials Engineering +16