Experimental investigations of thermophysical properties of some paraffin waxes industrially manufactured in Poland

Piotr Zbińkowski, J. Zmywaczyk, Piotr Koniorczyk

AIP conference proceedings · 2017 · 14 citations · 5 references

Concepts

Abstract

Phase-change materials (PCM) can be applied as a heat absorbing/releasing medium in passive cooling systems. Such systems can be used in cooling and temperature stabilization of electronic components, i.e., Li-ion batteries, photovoltaic modules or light emitting diodes (LED). In order to optimize heat transfer in passive cooling systems experimental studies of PCM thermophysical properties are necessary. A good PCM candidate for passive cooling systems may be paraffin waxes due to their relatively high latent heat of fusion (L ~ 200 J·g−1), suitable for working of electronic devices range of melting temperatures (22 °C – 68 °C) and a reasonable price. However, their main drawback is a relatively low thermal conductivity k ranging from 0.148 W·m−1·K−1 to 0.358 W·m−1·K−1. In this paper were presented results of experimentally determined temperature characteristics of thermophysical parameters of four paraffin waxes industrially manufactured in Jasło/Poland by POLWAX. The density ρ of the test paraffin waxes determined at room temperature (20 °C) using a laboratory balance RADWAG X/60/220 comprised from 0.82 g·cm−3 to 0.94 g·cm−3. The thermal diffusivity κ of paraffin waxes was tested within temperature range from –50 °C to 30 °C every 20 °C interval using the NETZSCH LFA 467 HyperFlash. The test specimens having form of cylinder were 12.7 mm in diameter and 2.15 – 2.20 mm in height. Prior to the experiment the face and the back surface of each specimen were coated with a thin layer of graphite 33 having a thickness of several micrometers in accordance with the recommendation given by NETZSCH. The thermal diffusivity of the test paraffin waxes within temperature interval –40 °C – 20 °C was determined to be 0.083 mm2·s−1 to 0.216 mm2·s−1. Thermal effects and the apparent heat capacity cp of the tested materials were measured in the temperature range from –10 °C to 100 °C using the NETZSCH DSC 404 F1 Pegasus at 10 K·min−1 heating/cooling rates in an atmosphere of helium as an inert gas. Thermal degradation studies of the test specimens were carried out in TG/DTG analysis, using NETZSCH STA 2500 Regulus within temperature range from 30 °C – 800 °C. The results of the heat capacity obtained by using DSC method and determined from the LFA 467 thermal diffusivity measurements due to applying Pyroceram 9606 as a reference material of known thermophysical properties were compared with each other. The thermal conductivity k of the tested paraffin waxes was evaluated using a well-known relationship k = κ · ρ · cp. In the investigated temperature range from −40 °C to 20 °C the thermal conductivity of the test paraffin waxes was changing from 0.157 W·m−1·K−1 to 0.282 W·m−1·K−1. DSC investigations revealed that the phase-change transition connected with the melting of the test paraffin waxes was a two-step, and in case of LUXOLINA ST, it was a three-step process (solid-solid and then solid-liquid) within temperature range from 30 °C to 65 °C as determined from the onset. The current studies of determining thermophysical properties of some paraffin waxes are treated as a starting point for selecting the most adequate PCM candidate for passive cooling systems of high-power LED street lamp.

References

5