Journal of Traffic and Transportation Engineering (English Edition) · 2017 · 26 citations · 13 references
EngineeringCivil EngineeringMaterials EngineeringMaterials CharacterizationMechanical Behavior Of MaterialsPavement EngineeringAsphalt MaterialsMaterial TestingPavement FatiguePavement MaterialsPavement Performance AnalysisPaving MaterialsAsphalt BinderAsphalt Mixture Fatigue BehaviorAsphalt MixturesBinder Fatigue PropertiesCyclic Compressive LoadingFatigue ResistanceIndirect Tensile Fatigue TestLow-temperature Cracking
Standard asphalt mixtures for road infrastructures consist of natural aggregate and bitumen. A number of research efforts have successfully investigated the possibility of replacing the conventional aggregate skeleton with industrial by-products such as slag originating from steel production process. However, little is known on the effect of steel slag on the mixtures performance properties such as resistance to low-temperature cracking and to permanent deformation, stiffness and fatigue. This paper presents a comprehensive investigation on the fundamental performance properties of different types of asphalt mixtures prepared with 100% LD slag aggregate and a conventional asphalt mixture containing natural Gabbro aggregate. Sophisticated testing methods were used to evaluate the key performance parameters for the set of asphalt mixtures investigated. In this study, low temperature cracking was addressed through thermal stress restrained specimen tests. Penetration tests and cyclic compression tests were used to evaluate the response of asphalt binder and asphalt mixture to permanent deformation due repeated loading, respectively. The cyclic indirect tensile test was selected for investigating both stiffness properties and fatigue resistance. For this purpose the complex stiffness modulus was measured to quantify material stiffness under different temperature and loading conditions providing information on the visco-elasto-plastic material behavior. Fatigue tests were used to determine the progressive and localized material damage caused by cyclic loading. The experimental results indicate that asphalt mixtures prepared with LD slag are suitable for asphalt pavement construction and that in most cases they perform better than conventional asphalt mixtures prepared with Gabbro aggregate.
13
Products of steel slags an opportunity to save natural resources
H Motz, Jürgen Geiseler · Waste Management · 2001 · 809 citations
An Overview of Utilization of Steel Slag
Yi Huang, Guoping Xu, Huigao Cheng et al. · Procedia Environmental Sciences · 2012 · 737 citations · Full text
Engineering, Agricultural Engineering, Environmental Engineering +16