Triboelectrostatic separation of granular plastics mixtures from waste electric and electronic equipment

Abstract

The efficiency of the electrostatic separation of insulating granular mixtures depends on the electric charge carried by the particles. The first objective of this work was to characterize the tribocharging properties of various plastic materials in the composition of waste electric and electronic equipment: polyvinyl chloride (PVC), “high-impact” polystyrene (HIPS), acrylonitrile butadiene styrene (ABS), “high-density” polyethylene (HDPE), polycarbonate (PC), polyamide (PA). Thus, in a first series of experiments, 15 samples composed of binary mixtures of above plastics were initially charged in a fluidized bed device, then separated using a free-fall electrostatic separator. The six plastics could be ordered in a specific triboelectric series: PVC, HIPS, ABS, PEHD, PC, PA. The second objective was to evaluate the efficiency of three tribocharging devices: a static charger, a fluidized bed, and a fan-type device. The triboelectrostatic separation experiments performed with four different binary mixtures (PVC/PA, PC/PA, HIPS/PA, and HIPS/ABS) showed that the fluidized bed is the most effective.