The influence of the starting Cu-Sn phase on the superconducting properties of subsequently reacted internal-Sn Nb/sub 3/Sn conductors

M.T. Naus, Peter J. Lee, D. C. Larbalestier

IEEE Transactions on Applied Superconductivity · 2001 · 35 citations · 5 references

DOIFull text

Open access

Concepts

Abstract

We have studied the reaction conditions and properties of a high-Sn, internal-Sn Nb/sub 3/Sn conductor whose overall Cu-Sn composition was Cu-29 at.%Sn. By adjusting the mixing heat treatment during which the Cu and Sn interdiffuse prior to A15 reaction, it is possible to substantially surround the Nb filaments with /spl alpha/ and/or /spl epsi/-phase Cu-Sn. It does not seem possible, however, to homogeneously mix the Cu and Sn prior to A15 formation. The T/sub c/ distributions, measured both by SQUID and heat capacity, showed no dependence on significantly different mixing heat treatments. Magnetization measurements at 4.2 K and 12 K also showed that there were no significant differences in the H/sup */, H/sub c2/ and J/sub c/ (as indicated by /spl Delta/m). This implies that the composition and reaction behavior of the A15 phase is independent of the Cu-Sn phase in contact with the Nb filament prior to the reaction heat treatment and that scoping experiments on high-Sn, high-J/sub c/ internal-Sn conductors can be considerably simplified. Our studies suggest a new Cu-Nb-Sn intermetallic phase with a composition of Cu-23 at.%Nb-62at.%Sn.

References

5