ACS Applied Materials & Interfaces · 2017 · 67 citations · 21 references
EngineeringMaterials EngineeringMaterials ScienceElectronic MaterialsOptical MaterialsSemiconductor DevicesOrganic SemiconductorsPhotovoltaic DevicesPhotovoltaic MaterialsSolar CellsSolar Energy SystemsSolar Photovoltaic SystemsCrystalline SiliconCrystalline Silicon Solar CellsLight AbsorptionLight Absorption EnhancementOptical Path LengthOrganic Photovoltaic CellsOrganic Solar CellsPower Conversion
We designed and fabricated a random-size inverted-pyramid-structured polydimethylsiloxane (RSIPS-PDMS) sticker to enhance the light absorption of solar cells and thus increase their efficiency. The fabricated sticker was laminated onto bare glass and crystalline silicon (c-Si) surfaces; consequently, low solar-weighted reflectance values were obtained for these surfaces (6.88 and 17.2%, respectively). In addition, we found that incident light was refracted at the PDMS-air interface of each RSIPS, which redirected the incident power and significantly increased the optical path length in the RSIPS-PDMS sticker which was 14.7% greater than that in a flat-PDMS sticker. Moreover, we investigated power reflection and propagation through the RSIPS-PDMS sticker using a finite-difference time-domain method. By attaching an RSIPS-PDMS sticker onto both an organic solar cell (OSC) based on a glass substrate and a c-Si solar cell, the power conversion efficiency of the OSC and the c-Si solar cell were increased from 8.57 to 8.94% and from 16.2 to 17.9%, respectively. Thus, the RSIPS-PDMS sticker is expected to be universally applicable to the surfaces of solar cells to enhance their light absorption.
21