Pure and Applied Chemistry · 2017 · 10 citations · 15 references
Natural SciencesMaterials EngineeringMaterials ScienceMaterials CharacterizationPolymer ChemistryPolymer MaterialsNatural StonePorous MaterialsSilicon MaterialsStone ConsolidationStone MaterialsStone Weathering ProcessesContact Angle MeasurementsMercury Intrusion PorosimetryOpen PorosityPore Network AnalysisPore Network StructurePorosityStone Surface DurabilityWater Absorption
Abstract This work studies the polymerization process of four different commercially available silicon-based polymers and their consequent effect on surface tension and water transport properties of natural stones used in architectural monuments, essential for modeling and predicting the durability of natural stones against weathering action of aqueous solutions. The four products studied consisted of two ethyl-silicate based materials, an alkyl-alkoxy siloxane oligomer with hydrophobic agents and finally, a silane/siloxane emulsion. In all cases, the morphology of the amorphous material deposited into the pore network of stones was examined by electron microscopy (SEM). The polymerization process was studied by infrared spectroscopy (FTIR) on both inert surface and porous stone substrate. The treated stone specimens were further tested after polymerization in terms of determination and comparison of water absorption coefficient, open porosity, pore size distribution (mercury intrusion porosimetry) and surface tension (contact angle measurements) properties. According to the analysis, the modification of the wetting properties of the stone surface should be related rather with the chemistry than the microstructure of the xerogels alone.
15
Silicate Consolidants for Stone
George W. Scherer, George Wheeler · Key engineering materials · 2008 · 154 citations · Full text
Recent progress in drying of gels
George W. Scherer · Journal of Non-Crystalline Solids · 1992 · 125 citations