Self-Assembled Molecular Hybrids of CoS-DNA for Enhanced Water Oxidation with Low Cobalt Content

Abstract

Water oxidation in alkaline medium was efficiently catalyzed by the self-assembled molecular hybrids of CoS-DNA that had 20 times lower Co loading than the commonly used loading. The morphological outcome was directed by varying the molar ratio of metal precursor Co(Ac) 2 and DNA and three different sets of CoS-DNA molecular hybrids, viz. CoS-DNA(0.036), CoS-DNA(0.06), and CoS-DNA(0.084) were prepared. These morphologically distinct hybrids had shown similar electrocatalytic behavior, because of the fact that they all contained the same cobalt content. The CoS-DNA(0.036), CoS-DNA(0.06), and CoS-DNA(0.084) required very low overpotentials of 350, 364, and 373 mV at a current density of 10 mA cm –2 (1 M KOH), respectively. The advantages of lower overpotential, lower Tafel slope (42.7 mV dec –1 ), high Faradaic efficiency (90.28%), high stability and reproducibility after all, with a lower cobalt loading, have certainly shown the worth of these molecular hybrids in large-scale water oxidation. Moreover, since DNA itself a good binder, CoS-DNA molecular hybrids were directly casted on substrate electrodes and used after drying. It also showed minimum intrinsic resistance as DNA is a good ionic and electronic conductor. Besides, the present method may also be extended for the preparation of other active electrocatalysts for water splitting.