ACS Applied Materials & Interfaces · 2017 · 49 citations · 54 references
Natural SciencesChemical EngineeringMaterials ScienceCatalysisInorganic ChemistrySurface ScienceCatalyst CharacterizationCatalyst PreparationCatalyst SynthesisCatalytic MaterialsCatalytic Reaction EngineeringSupported CatalystsCatalytic ActivityMesoporous MaterialsMesoporous SupportsMetal CatalystsMetal Oxide CatalystsPorous Supported CatalystsSupported Catalyst PreparationSupported Metal Catalysts
Supported Ni catalysts on three mesoporous SiO 2 supports (i.e., SBA-15, MCM-41, and HMS) were prepared using a solid-state reaction between Ni(NO 3 ) 2 and organic template-occluded mesoporous SiO 2 . For comparison, supported Ni catalysts on mesoporous SiO 2 synthesized by the conventional impregnation method were also included. The catalysts were characterized by scanning electron microscopy, X-ray diffraction, UV–vis diffuse reflectance spectroscopy, N 2 adsorption, X-ray photoelectron spectroscopy, H 2 temperature-programmed reduction, transmission electron microscopy, and transmission electron microscopy–energy-dispersive X-ray. The catalytic properties of the catalysts were evaluated using gas-phase catalytic hydrodechlorination of 1,2-dichloroethane. The results showed that upon grinding Ni(NO 3 ) 2 with template-occluded mesoporous SiO 2, strong coordination between Ni 2+ and dodecylamine was identified in the Ni(NO 3 ) 2 –HMS system. Additionally, the results of H 2 temperature-programmed reduction revealed that NiO in calcined NiO/HMS was reduced at higher temperature than those in calcined NiO/SBA-15 and NiO/MCM-41, reflecting the presence of a strong interaction between NiO and mesoporous SiO 2 in NiO/HMS. Consistently, the average particle sizes of metallic Ni were found to be 2.7, 3.4, and 9.6 nm in H 2 -reduced Ni/HMS, Ni/SBA-15, and Ni/MCM-41, respectively, indicative of a much higher Ni dispersion in Ni/HMS. For the catalytic hydrodechlorination of 1,2-dichloroethane, Ni/MCM-41 synthesized by the solid-state reaction method exhibited a catalytic activity similar to that prepared by the impregnation method, while higher catalytic activities were observed on Ni/HMS and Ni/SBA-15 than on their counterparts prepared by the impregnation method. Furthermore, a higher conversion was identified on Ni/HMS than on Ni/SBA-15 and Ni/MCM-41, highlighting the importance of template type for the preparation of highly dispersed metal catalysts on mesoporous SiO 2 .
54
Triblock Copolymer Syntheses of Mesoporous Silica with Periodic 50 to 300 Angstrom Pores
Dongyuan Zhao, Jianglin Feng, Qisheng Huo et al. · Science · 1998 · 11.6K citations
CO2-Reforming of Methane over Transition Metals
J.R. Rostrup-Nielsen, Jørn H. Hansen · Journal of Catalysis · 1993 · 1.3K citations