Environmental Technology · 2017 · 28 citations · 46 references
Natural SciencesChemical EngineeringChemistryElectrochemical EngineeringElectrochemistryInorganic ChemistryElectrochemical KineticsElectrode MaterialsElectrode-electrolyte InterfacesElectrolyte SolutionsRedox-active MaterialsSupporting ElectrolytesAqueous ElectrolytesConductivityConductivity Of Electrolyte SolutionsCurrent DensityEffluent ManagementElectrode ProcessesOptimization Of Operating ConditionsSludge Formation
This work assesses the role of the operational conditions upon the electro-activation of persulfate (PS) using sacrificed iron electrode as a continuous low-cost Fe2+ source. An aqueous phenol solution (100 mg L−1) was selected as model effluent. The studied variables include current density (1–10 mA cm−2), persulfate concentration (0.7–2.85 g L−1), temperature (30–90°C) and the solution conductivity (2.7–20.7 mS cm−1) using Na2SO4 and NaCl as supporting electrolyte. A mineralization degree of around 80% with Na2SO4 and 92% in presence of NaCl was achieved at 30°C using 2.15 g L−1 PS at the lowest current density tested (1 mA cm−2). Besides PS concentration, temperature was the main variable affecting the process. In the range of 30–70°C, it showed a positive effect, achieving TOC conversion above 95% (using Na2SO4 under the previous conditions) along with a significant increase in iron sludge, which adversely affects the economy of the process. A lumped and simplified kinetic model based on persulfate consumption and TOC mineralization is suggested. The activation energy obtained for the TOC decay was 29 kJ mol−1. An estimated operating cost of US$ 3.00 per m3 was obtained, demonstrating the economic feasibility of this process.
46
A rapid spectrophotometric determination of persulfate anion in ISCO
Chenju Liang, Chiu-Fen Huang, Nihar Mohanty et al. · Chemosphere · 2008 · 1.4K citations