3D Printing in Medicine · 2017 · 118 citations · 27 references
Veterinary MedicineBiomedical EngineeringRadiologyBiomedical ImagingDiagnostic ImagingDiagnostic Radiology3D Imaging3D ReconstructionComputed TomographyImage Quality AssessmentMedical ImagingThree-dimensional Reconstruction3D Image Acquisition3D Medical Image Analysis3D Printed ModelsComputational PhantomsPatient-specific ModelsQuality Assurance PhantomsThree-dimensional Model AcquisitionThree-dimensional Model Generation
BACKGROUND: The purpose of this study is to provide a framework for the development of a quality assurance (QA) program for use in medical 3D printing applications. An interdisciplinary QA team was built with expertise from all aspects of 3D printing. A systematic QA approach was established to assess the accuracy and precision of each step during the 3D printing process, including: image data acquisition, segmentation and processing, and 3D printing and cleaning. Validation of printed models was performed by qualitative inspection and quantitative measurement. The latter was achieved by scanning the printed model with a high resolution CT scanner to obtain images of the printed model, which were registered to the original patient images and the distance between them was calculated on a point-by-point basis. RESULTS: A phantom-based QA process, with two QA phantoms, was also developed. The phantoms went through the same 3D printing process as that of the patient models to generate printed QA models. Physical measurement, fit tests, and image based measurements were performed to compare the printed 3D model to the original QA phantom, with its known size and shape, providing an end-to-end assessment of errors involved in the complete 3D printing process. Measured differences between the printed model and the original QA phantom ranged from -0.32 mm to 0.13 mm for the line pair pattern. For a radial-ulna patient model, the mean distance between the original data set and the scanned printed model was -0.12 mm (ranging from -0.57 to 0.34 mm), with a standard deviation of 0.17 mm. CONCLUSIONS: A comprehensive QA process from image acquisition to completed model has been developed. Such a program is essential to ensure the required accuracy of 3D printed models for medical applications.
27
Kah Heng Alexander Lim, Zhou Yaw Loo, Stephen J. Goldie et al. · Anatomical Sciences Education · 2015 · 490 citations
Medicine, Anatomy, Medical Education +11
Additively manufactured medical products – the FDA perspective
Matthew Di Prima, James Coburn, David Hwang et al. · 3D Printing in Medicine · 2016 · 322 citations · Full text
Engineering, Biomedical Engineering, Manufacturing Engineering +16
Mark Michalski, Joseph S. Ross · JAMA · 2014 · 220 citations