ECS Transactions · 2017 · 10 citations · 0 references
Natural SciencesMaterials EngineeringMaterials ScienceElectrochemical EngineeringElectrochemistryEnergy MaterialsBattery TechnologyElectrochemical CellsElectrochemical Energy ConversionElectrochemical Energy StorageElectrode MaterialsRedox-active MaterialsBattery Charge-discharge TestingCoulombic EfficiencyCurrent DensityIon Permeation MechanismsLow PermeabilityMembrane PerformanceRedox Flow BatteriesRedox Flow Battery Membranes
In this work, we investigate the effect of thickness and pre-treatment of Nafion membranes on the performance of the Ti/Mn redox flow battery. Nafion membranes of various thicknesses (N-115, NR-212 and NR-211) were evaluated. The charge-discharge test showed that the voltage efficiency increased with a thinner membrane, while the coulombic efficiency was not so much dependent on the thickness of membrane. A high energy efficiency of 83.9% at 100 mAcm-2 was obtained with NR-211 (25 μm). With the pre-treatment of NR-211 by soaking in deionized water at 75 ºC for 18 hours, the energy efficiency further increased only at a higher current density of 200 mAcm-2 due to the increased ion permeation rates. The highest energy efficiency 84.3% at 200 mAcm-2 was achieved combined with a highly reactive electrode. The relatively low permeability of Ti3+ and Mn3+ contributed to the improved performance with thin and pre-treated Nafion membranes.