On the Anomalus Behavior of Mechanical Properties in Metastable Cr-Ni Austenitic Stainless Steels at Ambient Temperatures

Yukishige Fukase, Kazuo Ebato, Nobuhiro Okubo, Seiichi Murao

Journal of the Japan Institute of Metals and Materials · 1968 · 10 citations · 0 references

DOIFull text

Open access

Concepts

Abstract

Mechanical properties at ambient temperatures were studied in detail on metastable austenitic Cr-Ni stainless steels and the relations between their particularity and structural changes were discussed.The metastable austenitic steels is strengthened by the occurrence of martensite during deformation and the increment in strength corresponds to the amount of martensite. Fracture elongation shows the maximum value at the temperature or the composition, at which the following two conditions are satisfied.(1) A large amount of deformation is available in austenite before martensitic transformation.(2) Once local contraction occurs, martensite is gradually induced and the increment in strength caused by this martensite is large enough to cancel the increment in stress at the spot where the local contraction takes place.When the condition (2) is satisfied, plasticity is increased as well as strength. This phenomenon is attributed to the martensite induced during deformation and may be called “Transformation Plasticity”.The stability of austenite is indicated with the temperature at which the maximum elongation is obtained.