Dental Materials Journal · 2017 · 38 citations · 29 references
DentistryDental Materials ScienceProsthodonticsDental MaterialsProsthodontic BiomaterialsProsthodontic MaterialsAll-ceramic RestorationsCeramic RestorationsCrown MaterialsDental CeramicsOcclusal AnalysisCad And Cam Ceramic RestorationsCad And Cam Dental CeramicsCeramic Crown SystemsCeramic Restoration Marginal FitDental CrownsMetal-ceramic Crown Marginal FitPost Hoc AnalysisZirconia Ceramics
The purpose of this study is to evaluate the precision of fit of posterior crowns made from three commercial CAD/CAM zirconia ceramics and conventional metal-ceramic technique. The external and internal marginal fit of the crowns was evaluated using direct SEM-based measurements. The data were subjected to Kruskal-Wallis, multicomparison post hoc analysis and Wilcoxon rank sum tests (α=0.05). Significant differences were observed for the external (p<0.002) and the internal (p<0.0001) marginal evaluation among the groups. No differences were observed between the buccal and lingual surfaces for the external (p=0.34) and internal (p=0.55) evaluations. No differences were showed between the external and internal measurements (p=0.37). The accuracy of fit was within the range of clinical acceptance. The lowest discrepancies corresponded to the NobelProcera group for external (39.3±11.81 μm) and internal (41.09±7.54 µm) marginal fit. The results confirmed that destructive methods are not required to assess the marginal fit of dental prosthetic crowns.
29
The estimation of cement film thickness by an in vivo technique
J W McLean, Fraunhofer von · BDJ · 1971 · 1.4K citations
Clinical fit of Procera AllCeram crowns
Klaus Boening, Burkhard H. Wolf, Annette Schmidt et al. · Journal of Prosthetic Dentistry · 2000 · 286 citations