AIP conference proceedings · 2017 · 11 citations · 21 references
EngineeringChemical EngineeringEnvironmental EngineeringEnvironmental RemediationWastewater TreatmentWater TreatmentAdsorption ProcessesAdsorptive SeparationsHeavy Metal RemovalIndustrial Wastewater TreatmentSurface AdsorptionAdsorbent CapacityAdsorbent CharacterizationAdsorption CapacityAdsorption Of Heavy MetalsAdsorption PhenomenaContact Time EffectsManganese RemovalPh Effects On Metal Removal
Adsorption of manganese (Mn) from aqueous solution by using pumice from Sungai Pasak, West Sumatera, Indonesia as low-cost adsorbent was studied. Batch experiments were carried out at ambient temperature (25°C) and 100 rpm of agitation speed to examine the effect of various experimental parameters on the removal of Mn such as solution pH, dose of adsorbent, particle size of adsorbent, initial concentration and contact time. The Langmuir and Freundlich models were employed to characterize the adsorption isotherm of Mn by the pumice. The results revealed that the optimum condition of Mn removal by pumice were 0.3 g/L of adsorbent dose, 90 min of contact time of adsorption, <149 µm of particle size, 4 of pH solution and 6 mg/l of Mn concentration with 171 mg Mn/g pumice of adsorption capacity. The Freundlich model was found to better fitting of adsorption isotherm within the concentration range studied. This study indicated that pumice from Sungai Pasak, West Sumatera, Indonesia has potential for Mn removal from groundwater or other polluted waters.
21
Ramiro José Espinheira Martins, Rosana Pardo, Rui A.R. Boaventura · Water Research · 2003 · 270 citations · Full text
Natural Sciences, Environmental Engineering, Environmental Sciences +12