IOP Conference Series Materials Science and Engineering · 2017 · 15 citations · 12 references
EngineeringMaterials EngineeringMaterials ScienceAdditive ManufacturingComputational Materials ScienceManufacturing ProcessesMetal Additive ManufacturingMicrostructure AnalysisMicrostructure EvolutionPhase-field ModelingSinteringSolidification KineticsAdditive Manufacturing MicrostructureDendritic Growth ModelingLaser Additive ManufacturingManufacturingMicrostructure DevelopmentProcess ParametersProcess Parameters OptimizationTemperature Gradient Effects
Direct Metal Laser Sintering (DMLS) is a new technology in the field of additive manufacturing, which builds metal parts in a layer by layer fashion directly from the powder bed. The process occurs within a very short time period with rapid solidification rate. Slight variations in the process parameters may cause enormous change in the final build parts. The physical and mechanical properties of the final build parts are dependent on the solidification rate which directly affects the microstructure of the material. Thus, the evolving of microstructure plays a vital role in the process parameters optimization. Nowadays, the increase in computational power allows for direct simulations of microstructures during materials processing for specific manufacturing conditions. In this study, modeling of microstructure evolution of Al-Si-10Mg powder in DMLS process was carried out by using a phase field approach. A MATLAB code was developed to solve the set of phase field equations, where simulation parameters include temperature gradient, laser scan speed and laser power. The effects of temperature gradient on microstructure evolution were studied and found that with increase in temperature gradient, the dendritic tip grows at a faster rate.
12
Lasers and materials in selective laser sintering
Jean‐Pierre Kruth, X. Wang, Tahar Laoui et al. · Assembly Automation · 2003 · 806 citations