Metals · 2017 · 31 citations · 19 references
Natural SciencesChemistryEarth SciencesAnalytical ChemistryInorganic ChemistryWater TreatmentHeavy Metal ContaminationHeavy Metal RemediationHeavy Metal RemovalIon ExchangeMetal RecoveryMineral ChemistryArsenic RemovalEnvironmental Metal ContaminationIon Exchange RemediationIon Exchange RemovalIon Exchange TreatmentMetal Ion RemovalMetal RemediationMetal Removal
This work shows the physicochemical behavior of two different diatoms from the country of Mexico (State of Jalisco and Hidalgo) with similar compositions. These were used to eliminate toxic cations from a synthetic solution containing 5.270 mg As3+/L; 4.280 mg Ag+/L; 3.950 mgNi2+/L; 4.090 mg Cr6+/L; and 4.081 mg Pb2+/L. These diatoms were used as filters, and the quantity of cations remaining in the solution after filtering was measured. According to the most important results found, for the recovery of metals, both minerals achieved arsenic, silver, lead, and nickel recoveries up to 95%, and lower than 10% for chromium. This could be due to the absence of an environment to reduce Cr6+ to Cr3+. On the other hand, it was observed that there was no selectivity during the recovery of the other cations present in the solution. According to efficiency of interchange, the mineral from Hidalgo is slightly better than the mineral from Jalisco for the removal of arsenic, lead, and silver. For nickel, and particularly Cr6+, the efficiency is higher for the sample from Jalisco.
19
Ping Sheng, Yen‐Peng Ting, J. Paul Chen et al. · Journal of Colloid and Interface Science · 2004 · 1.1K citations
Life Sciences, Environmental Engineering, Marine Sciences +12
Arsenate removal from water by a weak-base anion exchange fibrous adsorbent
Md. Rabiul Awual, Shinya Urata, Akinori Jyo et al. · Water Research · 2007 · 244 citations