Applied Optics · 2017 · 16 citations · 26 references
EngineeringElectrical EngineeringMaterials ScienceOptical MaterialsOptoelectronicsPhotonicsOptical PolymersOrganic SemiconductorsPhotovoltaic DevicesPhotovoltaic MaterialsPolarization OpticsSolar CellsOrganic Photovoltaic CellsOrganic PhotovoltaicsOrganic Solar CellsPolarimeter DesignPolarimetric Instrument DesignSignal-to-noise RatioSpatial Resolution MeasurementStokes Parameters
An intrinsic coincident full-Stokes polarimeter is demonstrated by using strain-aligned polymer-based organic photovoltaics (OPVs) that can preferentially absorb certain polarized states of incident light. The photovoltaic-based polarimeter is capable of measuring four Stokes parameters by cascading four semitransparent OPVs in series along the same optical axis. This in-line polarimeter concept potentially ensures high temporal and spatial resolution with higher radiometric efficiency as compared to the existing polarimeter architecture. Two wave plates were incorporated into the system to modulate the S3 Stokes parameter so as to reduce the condition number of the measurement matrix and maximize the measured signal-to-noise ratio. Radiometric calibration was carried out to determine the measurement matrix. The polarimeter presented in this paper demonstrated an average RMS error of 0.84% for reconstructed Stokes vectors after normalized to S0. A theoretical analysis of the minimum condition number of the four-cell OPV design showed that for individually optimized OPV cells, a condition number of 2.4 is possible.
26
Review of passive imaging polarimetry for remote sensing applications
J. Scott Tyo, Dennis L. Goldstein, David B. Chenault et al. · Applied Optics · 2006 · 1.7K citations
Optimization of retardance for a complete Stokes polarimeter
Derek Sabatke, Michael R. Descour, Eustace L. Dereniak et al. · Optics Letters · 2000 · 354 citations · Full text