Environmental Research Letters · 2017 · 143 citations · 43 references
EngineeringChemical EngineeringEnvironmental EngineeringPolymer EngineeringSustainability ScienceSustainable ManufacturingBio-based MaterialsBioplastic ProductionBiopolymer ProductionRenewable EnergyRenewable Feedstock UtilizationRenewable FeedstocksBio-based Polyethylene ProductionBio-based PolymersBiodegradable FeedstocksBiopolymer MaterialsGreenhouse Gas EmissionsPlant-based PolymersPolylactic Acid ProductionRenewable Feedstock Conversion
Plastics production is responsible for 1% and 3% of U.S. greenhouse gas (GHG) emissions and primary energy use, respectively. Replacing conventional plastics with bio-based plastics (made from renewable feedstocks) is frequently proposed as a way to mitigate these impacts. Comparatively little research has considered the potential for green energy to reduce emissions in this industry. This paper compares two strategies for reducing greenhouse gas emissions from U.S. plastics production: using renewable energy or switching to renewable feedstocks. Renewable energy pathways assume all process energy comes from wind power and renewable natural gas derived from landfill gas. Renewable feedstock pathways assume that all commodity thermoplastics will be replaced with polylactic acid (PLA) and bioethylene-based plastics, made using either corn or switchgrass, and powered using either conventional or renewable energy. Corn-based biopolymers produced with conventional energy are the dominant near-term biopolymer option, and can reduce industry-wide GHG emissions by 25%, or 16 million tonnes CO _2 e/year (mean value). In contrast, switching to renewable energy cuts GHG emissions by 50%–75% (a mean industry-wide reduction of 38 million tonnes CO _2 e/year). Both strategies increase industry costs—by up to $85/tonne plastic (mean result) for renewable energy, and up to $3000 tonne ^−1 plastic for renewable feedstocks. Overall, switching to renewable energy achieves greater emission reductions, with less uncertainty and lower costs than switching to corn-based biopolymers. In the long run, producing bio-based plastics from advanced feedstocks (e.g. switchgrass) and/or with renewable energy can further reduce emissions, to approximately 0 CO _2 e/year (mean value).
43
Climate Change 2013: The Physical Science Basis
Reinhard F. Stocker, D Qin, Gian‐Kasper Plattner et al. · 2013 · 6.8K citations
Ullmann's Encyclopedia of Industrial Chemistry.
James G. Speight · Petroleum Science and Technology · 1999 · 1.7K citations
Kevin G. Harding, John S. Dennis, Susan T.L. Harrison · Journal of Biotechnology · 2007 · 455 citations
Natural Sciences, Environmental Engineering, Environmental Sciences +17
Richard J. Plevin, Andrew D. Jones, Margaret Torn et al. · Environmental Science & Technology · 2010 · 441 citations
Natural Sciences, Environmental Sciences, Climate Science +14