Scientific Reports · 2017 · 106 citations · 48 references
EngineeringChemical EngineeringEnvironmental EngineeringWaste ManagementWastewater TreatmentWater TreatmentBiochar ProductionSludge ManagementSludge TreatmentSupercapacitor MaterialsSupercapacitorsWaste TreatmentBiochar AdsorptionBiochar SorbentsBiochar StabilityDisposalHeavy Metal Removal From SludgeSewage Sludge BiocharSewage Sludge TreatmentWaste Biomass Conversion
Biochar derived from waste biomass has proven as a promising sorbent for removal of heavy metals from wastewater. However, proper disposal of such a heavy metal-containing biochar is challengeable. The major objective of this study is to create a reuse way by converting the heavy metal-loaded biochar into supercapacitor. Two biochars were produced from dairy manure and sewage sludge, respectively, and subjected to sorption of Ni from solution, and then the Ni-loaded biochar underwent microwave treatments for fabrication of supercapacitor. The specific capacitance of biochar supercapacitor increased with Ni loading, especially the Ni-loaded biochar further treated with microwave in which the capacitance increased by over 2 times, compared to the original biochar supercapacitors. The increase of capacitance in the Ni-loaded biochar supercapacitor following microwave treatment was mainly attributed to the conversion of Ni into NiO and NiOOH, which was evidenced by X-ray diffraction and X-ray photoelectron spectroscopy. The biochar supercapacitors, especially microwave-treated Ni-loaded biochar supercapacitors exhibited the high stability of specific capacitance, with less than 2% loss after 1000 charge-discharge cycles. This study demonstrated that Ni-loaded biochar can be further utilized for generation of supercapacitor, providing a potential way for the reuse of exhausted carbonaceous sorbents.
48
Graphene/Polyaniline Nanofiber Composites as Supercapacitor Electrodes
Kai Zhang, Lili Zhang, Xin Zhao et al. · Chemistry of Materials · 2010 · 2.2K citations
Natural Sciences, Materials Engineering, Materials Science +17