Desalination and Water Treatment · 2017 · 37 citations · 42 references
EngineeringChemical EngineeringChemistryAnalytical ChemistrySurface ScienceAdsorption At InterfacesAdsorption ProcessesAdsorptive SeparationsIon ExchangeIon-exchange ChromatographySurface AdsorptionAdsorbent CharacterizationAdsorption ChemistryAdsorption IsothermsAdsorption KineticsAdsorption Of DyesAdsorption ReactionsAdsorption ThermodynamicsIsotherm Modeling
ABSTRACT Study on removal of anionic dye methyl orange (MO) from aqueous solution was investigated using ion exchange resin Amberlite IRA-400 batch adsorption process. Effect of operating adsorption factors that influence on the adsorption process such as contact time (1–300 min), initial dye concentration (25–500 ppm), solution pH (2.5–11.5), resin dose (5–100 g/L) and temperature (293–353 K) were studied. The extent of MO adsorption was increased with increase in the contact time, agitation speed, temperature, initial dye concentration and adsorbent dose but decreased with increase/decrease of the solution pH (maximum at pH-6.5). Equilibrium data were analyzed by both Langmuir isotherm and Freundlich adsorption isotherm. The maximum monolayer adsorption capacity of Amberlite IRA-400 was resulted as 74.4 mg/g at 303 K. The value of separation factor (R L ) from Langmuir equation and Freundlich constant (n) indicated on favorability of adsorption. Thermodynamic parameters such as ΔG°, ΔH° and ΔS° were calculated and the positive value of ΔH° (4.13, 3.63 and 7.09 kJ mol –1 ) for corresponding initial MO dye concentrations: 50, 100 and 200 ppm, respectively, in the solution indicated that the adsorption was of endothermic in nature. Kinetics result revealed that the adsorption of MO is of pseudo second-order and chemisorptions type.
42
Bahareh Tanhaei, Ali Ayati, Manu Lahtinen et al. · Chemical Engineering Journal · 2014 · 519 citations
Natural Sciences, Materials Engineering, Materials Science +16