Rare Metals · 2017 · 17 citations · 18 references
EngineeringMaterials EngineeringMaterials ScienceCeramic MaterialsMaterials ProcessingMetallurgyComposite MaterialsComposite ProcessingMetal Matrix CompositesNanocompositesPowder ProcessingSinteringCeramic PowdersPowder PreparationPowder ProductionPowder SinteringPowder Synthesis
Abstract The ball milling process and the CuWO 4 –WO 3 precursors were investigated, and a new highly concentrated wet ball‐milled process (HWM) was designed. W–20 wt% Cu composite powders with excellent sintering property were synthesized by highly concentrated wet ball‐milled process and co‐reduction. The powders were characterized by scanning electron microscopy (SEM), X‐ray diffraction (XRD), field electron transmission electron microscopy (FESEM) and laser‐diffraction diameter tester. The results indicate that particle size of WO 3 –CuO powder mixtures decreases to 390 nm rapidly with the milling time increasing to 5 h. The CuWO 4 precursors promote the microstructural homogeneity of W and Cu. W–Cu composite powders have a highly dispersed and well sintering property. The particle size of W–Cu powders milled by HWM for 5 h is about 680 nm. High‐resolution transmission electron microscopy (HRTEM) result suggests that W phase and Cu phase are mixed at nanometer scale. The above W–Cu composite powders reach the relative density of about 99.3%.
18
Mechanical alloying and milling
C. Suryanarayana · Progress in Materials Science · 2001 · 7.9K citations
Engineering, Manufacturing Engineering, Materials Science +12