Advances in Science and Technology – Research Journal · 2015 · 73 citations · 12 references
EngineeringMaterials EngineeringMaterials ScienceAdditive ManufacturingManufacturing ProcessesMechanical Behavior Of MaterialsComposite MaterialsMetal Additive ManufacturingStrength Of MaterialsStrengthening MechanismsStress AnalysisStress-strain BehaviorImpact StrengthMaterial Behavior ModelingMaterial Behavior PredictionMaterial Behavior SimulationOrientationsPart OrientationPart Orientation AnalysisYield Point
Numerous experimental studies, including experiments performed by the authors, have shown that the part orientation during layer deposition has a very strong influence on final strength of a product manufactured by additive Fused Deposition Technology. The paper presents the results of tensile, bending and impact strength tests performed on samples of various orientations, made out of ABS material using FDM technology. The results of these tests allowed discovering a unique phenomenon -with the changing orientation, not only the values of strength indexes change, but macroscopic material behavior under load as well. The transition between a "yield point" and "brittle" material usually happens in a certain range of orientation values, named a critical orientation by the authors. The paper indicates supposed ranges of critical orientation for various types of loads.
12