Mass transfer of sulfur from liquid iron into lime-saturated CaO-Al<sub>2</sub>O<sub>3</sub>-MgO-SiO<sub>2</sub>slags

Jianxiong Deng, Franz Oeters

Steel Research · 1990 · 18 citations · 3 references

Concepts

Abstract

Laboratory experiments on the kinetics of sulfur transfer from aluminium-deoxidized liquid iron into lime-saturated CaO-Al2O3-MgO-SiO2 slags were carried out at 1600°C in MgO crucibles with 1500 g iron and 180 to 250 g slag. The mass-transfer coefficients of sulfur were determined under defined flow conditions of liquid metal induced by gas stirring. A square-root dependence of measured rate constants on flow velocity of metal was found. This is interpreted as normal liquid-liquid mass transfer caused by the forced convection of gas stirring. It could be described by boundary-layer theory applied to the metal-slag interface. With increasing sulfur contents of metal mass-transfer coefficients became larger. This is interpreted as mass transfer by interfacial convection superimposed to normal mass transfer. Interfacial convection was confirmed by microscopic observation of quenched metal-slag interface samples. If the sulfur content in liquid iron exceeds a critical value, calcium sulfide crystals precipitate in slag at the slag-metal interface. The precipitation inhibits generation of interfacial convection.

References

3