Applied Composite Materials · 2016 · 41 citations · 14 references
EngineeringElectrical EngineeringMaterials ScienceElectromagneticsMaterials CharacterizationMicrowave EngineeringDielectric ResponseLightning DetectionMicrowave AntennasMicrowave MeasurementsStructural Health MonitoringWaveguidesDelaminationDelamination DamageDielectric CharacterizationDielectric Constant MeasurementDielectric PermittivityMicrowave DiagnosticsPermittivityPermittivity Measurement
The structural integrity of wind turbine blades can be adversely affected by their structural dynamics, temperature extremes, lightning strikes, ultraviolet radiation from sunlight and airborne particulate matter such as hailstones and sand. If subsurface delamination occurs and is undetected then this can lead to fibre breakage and catastrophic failures in composite blades. In this paper we introduce a microwave scanning technique that detects such delamination in practical blade assemblies. Using an open-ended waveguide sensor, the electromagnetic signal reflected from the composite is found to have a phase profile that can detect changes in the composite cross section. Glass fibre T-joints are scanned and the results used to detect thickness variations (e.g., the presence of the web) and delamination. Results are compared across the 18–20 GHz frequency band. The dielectric permittivity of the composite system is measured and is used to estimate the stand-off distance and operating frequency of the sensor. This is critical to the system’s ability to detect damage. When the sensor is close to the surface of the structure (standoff distance ≈ 5 mm), delamination down to 0.2 mm in width could be detected.
14
María Isabel Campo Blanco · Renewable and Sustainable Energy Reviews · 2008 · 863 citations
12th world conference on non-destructive testing
A.A.A. Scheerder · NDT International · 1989 · 211 citations