Ash Formation in Pilot-Scale Pressurized Entrained-Flow Gasification of Bark and a Bark/Peat Mixture

Abstract

Pressurized entrained-flow gasification (PEFG) of bark and a bark/peat mixture (BPM) was carried out in a pilot-scale reactor (600 kWth, 7 bar(a)) with the objective of studying ash transformations and behaviors. The bark fuel produced a sintered but nonflowing reactor slag, while the BPM fuel produced a flowing reactor slag. Si was enriched within these slags compared to their original fuel ash compositions, especially in the bark campaign, which indicated extensive ash matter fractionation. Thermodynamically, the Si contents largely accounted for the differences in the predicted solidus/liquidus temperatures and melt formations of the reactor slags. Suspension flow viscosity estimations were in qualitative agreement with observations and highlighted potential difficulties in controlling slag flow. Quench solids from the bark campaign were mainly composed of heterogeneous particles resembling reactor fly ash particles, while those from the BPM campaign were flowing slags with likely chemical interactions with the wall refractory. Quench effluents and raw syngas particles were dominated by elevated levels of K that, along with other chemical aspects, indicated KOH(g) and/or K(g) were likely formed during PEFG. Overall, the results provide information toward development of woody biomass PEFG and indicate that detailed understanding of the ash matter fractionation behavior is essential.