IEEE Transactions on Industrial Electronics · 2016 · 78 citations · 25 references
EngineeringElectrical EngineeringMechanical EngineeringElectric MachinesHeat TransferThermal AnalysisBrushless Dc MachinesMachine TestingMachine WindingsPermanent Magnet MachinesSynchronous MachinesThermal ManagementCurrent DensityFill FactorHeat Transfer In Electrical MachinesMotor WindingsPermanent Magnet Synchronous MachinesPermanent Magnet Synchronous MotorsTemperature Rise AnalysisVoid Ratio
This paper presents an equivalent winding model of a small and medium permanent-magnet synchronous motor. The model considers fill factor and void ratio. To verify the model, two winding samples are made. One is annular and adopts ordinary enameled wires. The other is circle but adopts self-adhesion wires. Temperature rises of the winding samples supplied with different current densities are tested. The calculated and tested results were compared. The equivalent winding model is also used for the temperature calculation of a 6-pole/9-slot permanent magnet synchronous motor. The influence of fill factor and void ratio on the temperature rise of the motor is investigated, as well as two overload short time states are compared. Comparing with ignoring the effect of the void ratio, the winding temperature estimation error reduces about 5 °C. Finally, winding temperature rises of a prototype are tested. The results can provide some references for choosing a reasonable current density and improving the accuracy of motor temperature estimation.
25
D.A. Staton, Aldo Boglietti, Andrea Cavagnino · IEEE Transactions on Energy Conversion · 2005 · 620 citations · Full text
Engineering, Electrical Engineering, Mechanical Engineering +17
Ziyuan Huang, Jiancheng Fang, Xiquan Liu et al. · IEEE Transactions on Industrial Electronics · 2015 · 236 citations
Engineering, Electrical Engineering, Mechanical Engineering +17