Journal of Physics D Applied Physics · 2016 · 222 citations · 32 references
Natural SciencesChemistryPhysicsAnalytical ChemistryPhysical ChemistryPlasma PhysicsHigh-temperature PlasmasPlasma FundamentalsPlasma SimulationPlasma SourcesPlasma-surface InteractionsAtmospheric Pressure Plasma SourcesAtmospheric Pressure Plasma TreatmentAtmospheric-pressure PlasmasDielectric Barrier Discharge TreatmentDielectric Barrier DischargesPlasma ProcessesPlasma TreatmentPulsed Plasma Sources
Atmospheric pressure plasmas, often applied over a thin liquid layer in wound and tumor therapies, generate reactive oxygen and nitrogen species that are processed by the liquid, and the resulting plasma–liquid synergy—encompassing evaporation, solvation, and multi‑timescale reactions from nanoseconds to minutes—is critical to treatment outcomes. This study uses a global model to investigate plasma–liquid interactions and liquid‑phase chemistry, aiming to capture the wide dynamic range of timescales involved. The model simulates 5000 voltage pulses from a dielectric barrier discharge over liquid‑covered tissue, followed by a 5‑minute afterglow, and examines how applied voltage, gas flow, pulse repetition frequency, and organic molecules in the liquid influence gas and liquid reactive species. Accumulation of long‑lived species such as ozone and N_xO_y causes the gas‑phase dynamics of the 5000th pulse to differ from the first, especially regarding negative ions.
Atmospheric pressure plasmas have shown great promise for the treatment of wounds and cancerous tumors. In these applications, the sample is usually covered by a thin layer of a biological liquid. The reactive oxygen and nitrogen species (RONS) generated by the plasma activate and are processed by the liquid before the plasma produced activation reaches the tissue. The synergy between the plasma and the liquid, including evaporation and the solvation of ions and neutrals, is critical to understanding the outcome of plasma treatment. The atmospheric pressure plasma sources used in these procedures are typically repetitively pulsed. The processes activated by the plasma sources have multiple timescales—from a few ns during the discharge pulse to many minutes for reactions in the liquid. In this paper we discuss results from a computational investigation of plasma–liquid interactions and liquid phase chemistry using a global model with the goal of addressing this large dynamic range in timescales. In modeling air plasmas produced by a dielectric barrier discharge over liquid covered tissue, 5000 voltage pulses were simulated, followed by 5 min of afterglow. Due to the accumulation of long-lived species such as ozone and N x O y , the gas phase dynamics of the 5000th discharge pulse are different from those of the first pulse, particularly with regards to the negative ions. The consequences of applied voltage, gas flow, pulse repetition frequency, and the presence of organic molecules in the liquid on the gas and liquid reactive species are discussed.
32
Petr Lukeš, Eva Doležalová, Irena Sisrova et al. · Plasma Sources Science and Technology · 2014 · 1.1K citations · Full text